Compressed air is air kept under greater pressure than atmospheric pressure to be used for energy transfer in industrial processes and many
applications
Air receiver tanks are absolutely essential for any compressed air system, not only acting as a buffer, but also allowing the system to perform more efficiently. Compressed air tanks have enormous pressure and are very important for the air compressor system so they must be designed to be exceptionally quiet and strong.
Compressed air tanks enable manufacturers to use air when the compressor is not working and they also provide additional air to the system during periods of high usage.
Primary tanks are located near the air compressor systems and act as a tank. Secondary tanks are located away from compressor systems but are still close enough to devices that require large amounts of air.
Compressed air tanks are designed to be exceptionally strong and durable because of the enormous pressure they contain. Many types of applications require air reception cabinets. These include:
Storage to protect against pressure fluctuations
Improved torque or speed
The volume of the compressed air tank should be tailored to the needs where you will use the air compressor.
The reception cabinets in storage units range from 30 to 8000 gallons.
Compressed air tanks provide a solution to the problem of turning on the compressor system when air is needed for only a few seconds. This reduces the cost of using the compressor. Use and maintenance costs are also reduced. Or when there is an increase in
use it is used to balance pressure
The air receiver tank is an important component of the compressed air system. The volume of the tank is 6 to 10 times the flow rate of the compressor system. The receiving tank is usually 150 cubic feet (minimum) of compressors at a rate of 25 square meters at 100 lbs.
It is a compressed air tank that can be used during peak demand. Removes water from the compressor system by cooling the air. The tank reduces pulse in the system. The pulse is usually caused by a periodic downstream operation or a frequency compressor.
The air receiving tank is an integral and important part of any compressed air system.
The receiving tank provides the following benefits:
The future tank acts as a compressed air tank to meet peak requirements.
The receiver tank will help to remove water from the system by allowing the air a chance to cool.
The receiver tank reduces the pulse in the system caused by the reciprocating
compressor or cyclic downstream process
Like a water tank saves a lot of water during dry periods and stores water during wet times, the air receiving tank compensates for peak demand and helps to balance the supply of the compressor with the demand of the system.
Improve speed or torque
And storage to protect against pressure fluctuations
Application storage to measure the high flow rate in the system, and more..
Energy storage (for emergency needs)
Stable pressure
Impact of pulse on gas equipment.
For the deposition of water, grease and dust in the air
Improve continuity and stability of gas production equipment
Reduce frequent start of the compressor, extend its life
The compressed air tank, or “portable tank”, is an easy-to-use workshop that allows you to store compressed air in an easy-to-use portable unit. You can fill the tank with pneumatic, using any type of air compressor, then carry the tank to wherever you need it. Compressed air tanks are commonly used to fill tires - on cars, bicycles, trailers and non-motorized transport vehicles
Its light weight and large size make the portable compressed air tank more useful in this field than portable air compressor in many situations. For example, if you need compressed air in any remote location where there is no electricity to operate the compressor, you can fill and transport an air tank at home or at a gas station
The compressed air tank is much lighter than the air compressor with a similar size tank, much larger than the tanks on highly portable compressors
Portable compressed air tanks consist of:
Air filling valve: The valve that you connect to when you fill the tank with a compressor.
Air Shut Off Valve: Knob turns to prevent air leakage from the tank when not in use.
Air pressure gauge: Indicates air pressure inside the tank as well as how full the tank is.
Pressure tank: The estimated pressure tank that holds compressed air.
Flexible hose: A hose for connecting compressed air from the tank.
To ensure that it will last for many years to come and will be able to cope with the daily use pressures, it is absolutely necessary to purchase from reputable brands such as Atlas Copco
Atlas Copco Equipment offers the best compressed air tanks in Egypt at the best prices
Contact Us